TM 9-2350-222-20-1-4
SHIFTING CONTROL AND RELATED PARTS REPAIR AND REPLACEMENT
(Sheet 15 of 15)
.
8.
Using 9/16 inch socket with extension, tighten
screws installed in steps 4 and 6, alternately.
NOTE
Make sure that components are
properly alined.
If components
bind, use shims as required to
make sure of proper alinement and
freedom of movement.
9.
Position brake control clevis (N) over brake
lever (P).
10. Using pliers, install straight pin (Q) through
clevis (N) and lever (P).
11. Using pliers, install cotter pin (R) in straight
pin.
12.
Install bolts (S) and (T) through connecting links (U) and link assembly (V).
13.
Using 9/16 inch socket and torque wrench, tighten bolts (S) and (T) to 15-20 lb-ft (20- 27 N-m).
14.
Adjust shifting linkage (page 11-2).
TA253383
Change 1
11-39
