TM 9-2350-222-20-1-3
FAN DRIVE OIL SEAL REPLACEMENT (Sheet 1 of 5)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Installation
TOOLS: Ratchet with 3/8 in. drive
Putty knife
Diagonal cutting pliers
Slip joint pliers
Hammer
1/2 in. socket with 3/8 in. drive
Brass drift
5 in. extension with 3/8 in. drive
Torque wrench with 3/8 in. drive (0-200 lb-in) (0-23 N-m)
SPECIAL TOOLS: Screw pullers (Item 1, Chapter 3, Section I) (2 required)
SUPPLIES: Sealing compound (Item 24, Appendix D)
Seal
Lockwire (Item 60, Appendix D)
Dry cleaning solvent (Item 54, Appendix D)
Rags (Item 65, Appendix D)
Watch
Boards (2 in. x 4 in. x 24 in.) (2 required)
PRELIMINARY PROCEDURES: Remove top deck (page 16-21)
Remove engine cooling fans (page 9-48)
Go on to Sheet 2
9-62
