TM 9-2350-222-20-1-3
TRANSMISSION SHROUD REPAIR (Sheet 1 of 6)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Cleaning and Inspection
Assembly
TOOLS: 7/16 in. combination box and open end wrench
Diagonal cutting pliers
Ratchet with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
3/4 in. socket with 1/2 in. drive
3/4 in. combination box and open end wrench
Putty knife
Slip joint pliers
Ball peen hammer
Cold chisel
Speeder brace with 1/2 in. drive
SUPPLIES: Lockwire (Item 59, Appendix D)
Dry cleaning solvent (Item 54, Appendix D)
Rags (Item 65, Appendix D)
Lockwasher (MS35338-44) (6 required)
Self-locking nuts (MS20500-428) (10 required)
Key washers (10873733) (4 required)
Self-locking nuts (MS20500-820 (6 required)
PRELIMINARY PROCEDURE:
Remove transmission shroud (page 9-20)
Go on to Sheet 2
9-26
