TM 9-2350-222-20- 1-3
RIGHT EXHAUST EJECTOR TUBE REPLACEMENT (Sheet 2 of 4)
3.
Using 9/16 inch wrench, remove and dis-
card six self-locking nuts (D) securing
ejector tube (E) to the turbosupercharger.
4.
Remove ejector tube (E) and gasket (F).
Discard gasket.
Using flat-tip screwdriver, remove clamp
5.
(G) and packing (H) from ejector tube (E).
Using cross-tip screwdriver and 5/16
6.
inch wrench, remove 11 screws (J),
7.
Remove insulation (N and P) from ejector
tube (E).
TYPICAL ENGINE RIGHT BANK SHOWN
Go on to Sheet 3
TA249111
8-26
Change 2