TM9-2350-222-20-1-3
FUEL-WATER SEPARATOR CONTROL ASSEMBLY REPLACEMENT (2D ENGINE)
(Sheet 7 of 8)
Using 1/2 inch socket and extension, install
10.
three capscrews, new lockwashers, and flat
washers (K) and clamp (L).
Using 1/2 inch socket, tighten capscrew (M).
11.
TEST:
1.
Connect engine for powerplant ground hop
2.
Set FUEL PUMPS switch in ON position
(TM 9-2350-222-10.
Go on to Sheet 8
TA148899
7-320
