TM9-2350-222-20-1-3
FUEL PUMP-TO-FUEL-WATER SEPARATOR HOSE ASSEMBLY REPLACEMENT
(Sheet 4 of 5)
INSTALLATION:
1.
Using 7/8 inch wrench, install hose connector
(A) to elbow (B).
2.
Using 13/16 inch wrench, install adapter (C) to
fuel pump (D).
3.
Using 7/8 inch wrench, install hose
connector (E) to adapter (C).
4.
Remove drain pan and rags placed under
manual drain valve.
TEST:
1.
Connect engine for powerplant ground hop
2.
Using 7/16 inch wrench, turn fuel-water
separator bleed cap (A) counterclockwise until
loose.
Go on to Sheet 5
TA148881
7-302
