TM9-2350-222-20-1-3
FUEL-WATER SEPARATOR FUEL FILTER OUTLET HOSE ASSEMBLY REPLACEMENT
(Sheet 3 of 3)
INSTALLATION:
1.
Coat threads of bulkhead elbow (A) with sealing
compound (Item 27, Appendix D).
2.
Using fingers, install hose assembly (B) on
bulkhead elbow (A).
3.
Using 7/8 inch wrench, tighten nut (C) of hose
assembly (B) on bulkhead elbow (A).
4.
Coat threads of water separator fuel filter
outlet elbow (D) with sealing compound (Item
27, Appendix D).
5.
Using fingers, install hose assembly (B) on
water separator fuel filter outlet elbow (D).
6.
Using 7/8 inch wrench, tighten nut of hose
assembly (B) on water separator fuel filter
outlet elbow (D).
7.
Using fingers, install hose clamp (E) on hose
assembly (B).
8.
Using fingers, install hose clamp (E) and hose
assembly (B) on mounting stud (F).
9.
Using 9/16 inch wrench, install self-locking nut
(G) on hose clamp (E) and mounting stud (F).
10.
11.
End of Task
TA149080
7-298