FUEL PRIMER (OUTLET TO ENGINE) TUBE ASSEMBLY REPLACEMENT (LATE MODEL)
(Sheet 6 of 7)
Make sure that front inlet tube clamp
(F) is also secured with front outlet
tube clamp (K) attaching hardware.
6. Using 7/16 inch socket, reach through access
opening (H) and secure front tube clamp (K) and
tube clamp (F) to clamp mount with screw (L)
and new lockwasher (M).
Make sure that main fuel line clamp
(N) is also secured with outlet tube
clamp (P) attaching hardware.
7. Install clamp (P) onto outlet tube (G).
8. Using 7/16 inch socket and 7/16 inch wrench,
install and tighten screw, new lockwasher, and
nut (Q) securing clamps (N) and (P) to bracket.
Go on to Sheet 7
Change 1 4-80.5