FUEL PRIMER (OUTLET TO ENGINE) TUBE ASSEMBLY REPLACEMENT (LATE MODEL)
(Sheet 3 of 7)
4. Using 7/16 inch socket, remove screw (F) and I
lockwasher (G) securing clamp (H). Throw
Gain access to rear of bulkhead
through left access opening (J)
located in turret compartment.
5. Using 9/16 inch wrench, reach through access
opening (J) and disconnect front nut (K) of tube
(B) from nipple (L).
6. Using 7/16 inch socket, remove screw (M) and
lockwasher (N) holding front clamps (P) to clamp
mount. Throw lockwasher away.
7. Remove tube (B) through engine compartment.
Remove clamps (D), (H), and (P) from tube (B).
Go on to Sheet 4
Change 1 4-80.2