TM 9-2360-222-34-1
FUEL PRIMER (OUTLET TO ENGINE) TUBE ASSEMBLY REPLACEMENT (LATE MODEL)
(Sheet 4 of 7)
8. Using 9/16 inch wrench and 11/16 inch wrench,
disconnect front outlet tube (Q) from nipple (R)
in front of bulkhead (S).
9. Using two 11/16 inch wrenches, remove nut (T)
from nipple (R) and remove nipple (R) from rear
of bulkhead (S).
INSPECTION:
Inspect threaded components for thread damage. Replace or repair if defective.
INSTALLATION:
1. Using two 11/16 inch wrenches, install nipple
(A) to rear of bulkhead (B) and secure with
nut (C).
2. Using 9/16 inch wrench and 11/16 inch
wrench, install front outlet tube (D) to nipple
(A).
Go on to Sheet 5
TA252602
Change 1 4-80.3