TM 9-2360-222-34-1
FUEL PRIMER INLET TO ENGINE TUBE ASSEMBLY REPLACEMENT (EARLY MODEL)
(Sheet 3 of 6)
7. Using 9/16 inch wrench and 11/16 inch wrench,
disconnect front inlet tube (N) from nipple (J) in
front of bulkhead (P).
8. Using two 11/16 inch wrenches, remove nut (Q)
from nipple (J) and remove nipple (J) from
bulkhead (P).
INSPECTION:
Inspect threaded components for thread damage. Replace or repair if stripped, cracked, or broken.
INSTALLATION:
1. Using two 11/16 inch wrenches, install nipple e
(A) to bulkhead (B) and secure with nut (C).
2. Using 9/16 inch wrench and 11/16 inch wrench,
install front inlet tube (D) to nipple c
Go on to Sheet 4
TA252608
Change 1 4-82