HYDRAULIC SELECTOR CONTROL VALVE REPLACEMENT (Sheet 3 of 8)
Pull tube (T) out of elbow (D).
Remove valve from reservoir mount. Pull tube
(U) out of reservoir adapter (N).
Using 1-3/4 inch wrench, remove adapter (N)
from reservoir. Throw away old packing.
Put valve (V) into vise.
15. Using pliers, remove clip and pin (W) (hidden).
16. Using 7/16 inch wrench on two screws and
Throw lockwashers away.
17. Remove handle (Y) and bracket (Z) from valve
18. Using 1/2 inch wrench on nut behind screw
(AA) and allen wrench on screw (AA), remove
nut and screw (AA). Remove handle (Y) from
Go on to Sheet 4