TM 9-2350-222-20-1-5
HYDRAULIC SELECTOR CONTROL VALVE REPLACEMENT (Sheet 4 of 8)
Using 1-5/8 inch wrench cm union (H), remove
union (H) from valve (V) and throw away old
packing.
Using 1-5/8 inch wrench on nuts (AB) and (AC),
loosen nuts (AB) and (AC) to let elbows (D) and
(Q) move freely.
21. Using 2 inch wrench on nut (AD), and 1-3/4
inch wrench on union (AE), remove nut
(AD) from union (AE). Remove tube (U)
from union (AE).
22.
Remove elbows (D) and (Q) from valve (V) and
throw away old packings. Remove nuts (AB)
and (AC) from elbows (D) and (Q).
23.
Using 1-3/4 inch wrench on union (AE), remove
union (AE) from valve (V) and throw away old
packing.
CLEANING AND INSPECTION:
1.
Using rags and dry cleaning solvent (Item 54, Appendix D), clean tubes and fitting.
2.
Check for damaged threads and parts.
3.
Replace damaged parts.
TA141175