HYDRAULIC RESERVOIR LINE FLUID FILTER REPLACEMENT (Sheet 3 of 8)
Remove elbow (H) from filter (Q). Remove
packing and nut (M) from elbow (H) and throw
Using 1-5/8 inch wrench, loosen nut (R) and
remove elbow (B) from filter (Q). Remove nut
(R) from elbow (B). Remove packing from elbow
and throw packing away.
Using 7/16 inch wrench on nuts (N) and using
7/16 inch socket on screws (P), remove three
screws (P) and nuts (N), and remove rear filter
(Q) from vehicle.
Using 1-1/2 inch wrench on nut (S), remove nut
(S) from union (T).
Using 1-112 inch wrench on nut (U), remove
nut (U) from union (V).
Using 1-3/4 inch wrench on unions (T) and (V),
loosen unions (T) and (V).
Using 7/16 inch wrench on three nuts (W) and
using 7/16 inch socket on three screws (X),
remove three screws (X) and nuts (W) from
front filter (Y).
Remove filter (Y) from mount by pushing
toward the left to move filter away from nut
(U) and then to the right to remove from nut
In vise, using 1-5/8 inch wrench on unions (T)
and (V). remove unions (T) and (V) from filter
(Y) and throw away old packings.
Go on to Sheet 4