TM 9-2350-222-20-1-5
HYDRAULIC RESERVOIR LINE FLUID FILTER REPLACEMENT (Sheet 2 of 8)
NOTE
If removing front filter, go to step
12.
1.
Put container and rags under tubes and rags
around valve.
2.
Using 1-1/2 inch wrench, remove nut (A) from
elbow (B).
3.
Using 1-5/8 inch wrench to hold elbow (C) and
using 1-1/2 inch wrench on nut (D), remove nut
(D) from elbow (C).
Using 9/16 inch socket, remove screw,
4.
lockwasher, and clamp (E). Remove tube (F)
from vehicle. Throw lockwasher away.
Using 1-1/2 inch wrench on nut (G), remove nut
5.
(G) from elbow (H).
6.
Using 1-1/2 inch wrench on nut (J), remove nut
(J) from adapter (K).
Remove tube (L) from vehicle.
7.
8.
Using 1-5/8 inch wrench on nut (M), loosen nut
(M).
Go on to Sheet 3
TA141159
18-57