TM 9-2350-222-20-1-5
AMMUNITION RACK DISPLACEMENT (Sheet 3 of 3)
INSTALLATION:
1.
into position.
2.
Using pinch bar, one person should slightly
person installs clamps.
3.
Install eight clamps (B), eight washers (C), four
screws (D), and four nuts (E). Do not tighten
nuts (E).
4.
Install eight washers (F), four screws (G), and
four nuts (H). Do not tighten nuts (H).
5.
Install clamp (J), two screws (K) and two
washers and two nuts (L).
6.
Install screw (M) and washers and nut (N).
7.
Using socket and 3/4 inch wrench, tighten
screws (K) and (M).
Using socket with 10 inch extension and
8.
another socket with 5 inch extension, tighten
four screws (G).
9.
Using socket with 5 inch extension and 3/4
inch wrench, tighten four screws (D).
10. Install master control panel mounting plate (page 10-157).
11.
Install turret traverse lock ('I'M 9-2350-222-20-2).
12.
13.
Install portable fire extinguisher mounting bracket (TM 9-2350-222-20-2).
14.
End of Task
TA139210