TM 9-2350-222-20-1-5
MACHINE GUN STOWAGE BRACKET REPLACEMENT (Sheet 1 of 1)
TOOLS: 7/16 in. combination box and open end wrench
7/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
SUPPLIES: Lockwashers (MS35338-44) (2 required)
NOTE
There are two machine gun stowage brackets. Replacement
procedures are identical.
1.
Using socket and wrench, remove two screws (A), lockwashers (B), and nuts (C) from machine gun
stowage bracket (D). Throw lockwashers (B) away.
2.
Remove machine gun stowage bracket (D).
INSTALLATION:
1.
Place machine gun stowage bracket (D) in position.
2.
Using socket and wrench, install two screws (A), new lockwashers (B), and nuts (C).
End of Task
TA139206