PLATE AND TRAY PLATFORM REPLACEMENT (Sheet 1 of 2)
3/4 in. combination box and open end wrench
3/4 in. socket with 1/2 in. drive
9/16 in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench
SPPLIES: Lockwasher (MS35338-46) (2 required)
Lockwasher (MS35338-44) (4 required)
REFERENCES: TM 11-5820-401-12
Remove driver's intercom box (TM 11-5820-401-12)
Using 3/4 inch socket on four screws (A), remove four screws (A), washers (B), and lockwashers (C)
holding plate and tray (D) to ammo rack (E). Throw lockwashers away.
Remove plate and tray (D) from ammo rack (E).
Remove strap (F) from plate and tray (D).
Go on to Sheet 2