TM 9-2350-222-20-1-5
FLASHLIGHT HOLDER ASSEMBLY REPLACEMENT (Sheet 1 of 1)
5/16 in. combination box and open end wrench
TOOLS:
3/8 in. combination box and open end wrench
SUPPLIES: Lockwasher (MS35335-32) (2 required)
REMOVAL:
Using 3/8 inch and 5/16 inch wrenches, remove two screws, lockwashers, and nuts (A) securing
1.
flashlight holder (B) to welded bracket (C). Throw lockwashers away.
Remove flashlight holder (B).
2.
Replace decal (D) if required.
3.
INSTALLATION:
Position flashlight holder (B) to bracket (C).
1.
Using 3/8 inch and 5/16 inch wrenches, install and secure two screws, new lockwashers, and nuts (A)
2.
to secure flashlight holder (B) to bracket (C).
End of Task
TA253654