HANDSET BOX BRACKET OR CABLE GUARD REPLACEMENT (LATE MODEL) (Sheet 3 of 3)
Position cable assembly (E) through open-
ing in bracket (A).
Position guard (F) over cable assembly (E)
and to bracket (A).
Install two screws (G) from underside of
fender, through guard (F) and install flat
washers (H) and new self-locking nuts (J)
onto screws. Use 9/16 inch socket and 9/16
inch wrench and tighten screw (G) and nut
Using 9/16 inch wrench, and 9/16 inch
socket install and tighten three screws (K)
and new self-locking nuts (L) to secure guard
(F) to bracket (A).
Install handset box (pages 10-194).
End of Task