REAR FENDER (LEFT AND RIGHT) STOWAGE BOX REPLACEMENT (Sheet 1 of 3)
9/16 in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench
Locknuts (MS51988-7) (7 required)
Plates (8705499) (as required)
Left and right stowage boxes are
removed in a similar manner.
1. Open stowage box door (A) for access to
Using wrench, remove one locknut and plate
spacer (B). Throw locknut away.
Using wrench and socket, remove two screws,
nuts, and plate spacers (C).
Using wrench and socket, remove three washers
and locknuts (D). Throw locknuts away.
Go on to Sheet 2