TM 9-2350-222-20-1-5
REAR FENDER (LEFT AND RIGHT) STOWAGE BOX COVER REPAIR (Sheet 1 of 4)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Cleaning and Inspection
Assembly
11/16 in. combination box and open end wrench
TOOLS:
Lag round nose pliers
Putty knife
Blachmith's anvil
9/16 in. combination box and open end wrench
2 lb. hammer
1/8 in. punch
Electric drill and drill set
SUPPLIES:
Cotter pin (MS24665-285)
Rivets (MS20470-AD6-8 (6 required)
Lockwasher (MS35338-46)(8 reuired)
Shim 10905163) (As required)
Pads (11659769) (2 required)
PRELIMINARY PROCEDURE:
DISASSEMBLY:
NOTE
Repair of both left and right
covers is identical.
Using pliers, remove cotter pin (A.) from
1.
handle (B). Throw cotter pin away.
Using 9/16 inch wrench, remove nut (C),
2.
washer (D), and tongue (E).
Remove handle (B) from stowage box cover (F).
3.
TA253642