TM 9-2350-222-20-1-5
FRONT FENDER (CENTER, LEFT AND RIGHT) STOWAGE BOX COVER REPAIR
(Sheet 1 of 4)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Cleaning and Inspection
Assembly
9/16 in. combination box and open end wrench
TOOLS:
11/16 in. combination box and open end wrench
Long round nose pliers
Putty knife
Blacksmith's anvil
Electric drill and drill set
2 lb. hammer
1/8 in. punch
1/4 in. punch
SUPPLIES:
Pads (11659769) (2 required)
Rivets (MS20470AD6-8) (as required)
Cotter pin (MS24665-285) (6 required)
Lockwasher (MS35338-46) (12 required)
Shim (10905163) (as required)
PRELIMINARY PROCEDURE:
DISASSEMBLY:
NOTE
Repair of right and left stow-
a g e boxes is the same.
Repair of all three stowage
box handles is the same.
Using pliers, remove cotter pin (A) from
1.
handle assembly. Throw cotter pin away.
Using 9/16 inch wrench, remove nut (B), flat
2.
washer (C) and tongue (D) from handle (E).
Remove handle (E) from lock (F).
3.
TA253636