DRIVER'S HATCH NIGHT VIEWER LATCH REPAIR (Sheet 10 of 10)
29. Position assembled parts as shown with
rod (T) over threaded portion of shaft (F).
30. Place flat washer (Z), new lockwasher
(AA), and nut (AB) on shaft (F).
31. Using 7/16 inch wrench, tighten nut (AB).
32. Hold night viewer latch firmly on a flat
surface. Release lever (K) and turn handle
(M) forward 1/2 turn to locked position.
Release and return to position shown.
Handle should lock in both
forward and rear positions
and plunger (W) should not
bind during movement.
End of Task