BRAKE MASTER CYLINDER MOUNTING BRACKET AND PUSH ROD REPLACEMENT
(Sheet 2 of 7)
Using 7/16 inch socket, remove screw (D) and
lockwasher (E). Throw lockwasher away.
Using 9/16 inch wrench, remove three screws
CarefulIy raise and remove bracket (A) with its
assembled parts from master cylinder.
Using hammer and punch, drive out pin (H).
Using hammer and punch, drive out pin (J).
Remove roller assembly (K) and two washers (L)
from clevis (M).
Move clevis (M) from between two bearings (N),
Go on to Sheet 3