BRAKE CONTROL PEDAL AND BRACKET REPAIR AND REPLACEMENT (Sheet 2 of 5)
Using pliers, remove two lockpins (D).
Remove two pins (E) and control pedal (F).
Using hammer and punch, drive out two spring
pins (G). Throw spring pins away.
Using hammer and punch, drive out two pins
Remove lever assembly (J) and two washers (K).
Remove lever assembly (L) and two washers
10. Remove remaining mounting screw and
lockwasher (B). Throw lockwasher away.
11. Using 3/8 inch wrench and 9/16 inch wrench,
remove nut (N) from screw (A).
Go on to Sheet 3