CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT, RIGHT FUEL TANK
(Sheet 4 of 9)
Using hands, disconnect cable (S) from
electrical connector (T).
Using diagonal cutting pliers, remove lockwire
(U) from four screws (V).
Using flat-tip screwdriver, remove four
(W) holding housing (X) to cover (Y).
Slowly separate capacitor and housing (X) from
cover (Y), Capacitor and housing (X) are
connected to cover (Y) with an electrical lead.
16. Using diagonal cutting pliers, remove lockwire
(Z) from eight screws (AA).
17. Using 1/2 inch socket, remove eight screws
(AA) and washers (AB).
18. Remove cover (Y) and gasket (AC) from fuel
tank. Throw gasket away.
Go on to Sheet 5
Change 1 10-405