CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT, LEFT FUEL TANK
(Sheet 5 of 6)
Position gasket (H) and cover (B) onto fuel
tank and install 12 screws (K) and washers
(L) securing cover (B) to fuel tank.
Using 1/2 inch socket and torque wrench,
tighten screws (K) to 50-60 lb-in (6-7 N.m).
Using slip joint pliers, install lockwire (M)
into screws (K).
6. Using screwdriver, secure electrical lead (N)
of capacitor and housing (P) to adapter (D)
with screw (Q) and new lockwasher (R).
Be sure to install capacitor and
housing with the connector facing
7. Position capacitor and housing (P) onto
cover (B) and, using screwdriver, install
four screws (S), new lockwasher (U.1) and
washers (U) securing capacitor and hous-
ing (P) to cover (B).
8. Using slip joint pliers, install lockwire (V)
into screws (S).
Go on to Sheet 6