TM 9-2350-222-20-1-4
CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT, RIGHT FUEL TANK
(Sheet 2 of 9)
4.
Using diagonal cutting pliers, cut lockwire
(C). Using 1/2 inch socket and ratchet,
remove 12 screws and washers (D) securing
fuel pump access cover (E).
5.
Using diagonal cutting pliers, cut lockwire
(F). Using 9/16 inch socket and ratchet,
remove four of five screws (G) securing access
cover (E) to fuel pump mounting bracket (H)
(underneath cover). Loosen, but do not
remove, fifth screw.
6. Swivel access cover (E) on fifth screw (G) until
you can withdraw mounting bracket (H) with
fuel pump (J) attached part way out of fuel
tank.
Go on to Sheet 3
10-403