TM 9-2350 -222-20-1-4
S T E E R I N G CONTROL LINKAGE ADJUSTMENT (Sheet 13 of 13)
Using
inch wrench on steering rod end
88.
turn clockwise or
bearing flat
counterclockwise until screw (AY) will pass
freely through steering rod end bearing (AZ)
and
Using fingers. install screw
through
and
steering rod end bearing
Using crowfoot wrench, adapter, and
90.
(BB) to
(20-27
15-20
Remove locating pins (B) and (V),
91.
Using torque wrench with socket, tighten
92.
to 15-20
(20-27
screw
LEFT SIDE OF TRANSMISSION
NOTE
I f steering is unacceptable, notify
support maintenance personnel,
93. Check steering controls with vehicle moving
(TM 9-2350-222-10).
94. Install transmission shroud (page
95. Install fixed fire extinguisher control valve
(page 21-48).
96. Install fixed fire extinguisher cylinders
21-51).
97. Unblock tracks (TM 9-2350-222-10)
End of Task
15-14 Change 5