FRONT STEERING CONTROL ROD ASSEMBLY REPLACEMENT (Sheet 1 of 3)
Adapter 3/8 in. to 1/2 in.
Slip joint pliers
Torque wrench with 1/2 in. drive (0-175 lb-ft) 0-237 N m)
9/16 in. combination box and open end wrench (2 required)
12 in. extension with 3/8 in. drive
5 in. extension with 3/8 in. drive
9/16 in. crowfoot wrench
Cotter pin (MX24665-132)
Metal locating pin (1/8 in. dia. by 2-1/2 in. long)
PRELIMINARY PROCEDURES: Block tracks (TM 9-2350-222-10)
Using pliers, remove cotter pin (A) from pin (B). Throw cotter pin away.
Using pliers, remove pin (B), washer (C), and washer (D).
Using wrench, remove bolt (E) from link (F).
Remove rod assembly (G).
Go on to Sheet 2
Change 1 15-17