TM 9-2350-222-20-1-4
PARKING BRAKE PAWL AND BELLCRANK ADJUSTMENT (Sheet 9 of 9)
29.
Remove locating pin (P) and using pry bar, rotate bellcrank (D) clockwise to release brakes.
Position cover and new gasket (B) on brake
30.
housing (C).
31.
studs of brake housing (C).
Using socket, install and tighten eight nuts
32.
gasket (C).
33.
Install 2A power plant (page 5-14) or 2D
power plant (page 5-37).
End of Task
TA253424
13.-18.6 Change 1