PARKING BRAKE CABLE ADJUSTMENT (Sheet 1 of 4)
9/16 in. combination box and open end wrench
15/16 in. combination box and open end wrench (2 required)
9/16 in. socket with 1/2 in. drive
6 in. ruler
Long round nose pliers
SUPPLIES: Cotter pins (MS24665-283)
Locating pin (1/8 in. drill or welding rod 4 in. long)
REFERENCE: TM 9-2350-222-10
Remove transmission shroud (page 9-20)
Block tracks (TM 9-2350-222-10)
Set transmission shift lever to N (neutral) position.
Using pliers, remove cotter pin, washer, and pin (A) holding brake cable clevis (B) to parking
brake lever (C). Throw cotter pin away.
Go on to Sheet 2
13-19(blank)/13-20 Change 1