TM 9-2350-222-34-1
RIGHT ANGLE DRIVE POWER TAKEOFF REPAIR (Sheet 1 of 10)
PROCEDURE INDEX
PROCEDURE
PAGE
Disassembly
Cleaning and Inspection
Assembly
TOOLS:
1/2 in. socket with 1/2 in. drive
Bearing puller set
1-1/8 in. socket with 1/2 in. drive
Snap ring pliers external
3/8 in. combination box and open end
Snap ring pliers internal
wrench
Slip joint pliers
7/16 in. combination box and open end
Flat-tip screwdriver
wrench
Dial indicator
5/16 in. socket head screw key (allen
Arbor press
wrench)
6 in. steel rule
SPECIAL TOOLS:
SUPPLIES:
Drip pan
Paper
Dry cleaning solvent (Item 12,
Seal (8728125)
Gasket (7699891)
Pencil
Packing (MS28775-235)
REFERENCE:
LO 9-2350-222-12
TM 9-2350-222-20
PRELIMINARY PROCEDURE:
Remove right angle drive from hydraulic pump and magnetic clutch
(TM 9-2350-222-20-1)
DISASSEMBLY:
1. Using 3/8 inch wrench, remove plug (A).
2. Place drip pan under housing (B) to catch
lubricant.
3. Using allen wrench, remove plug (C) and allow
lubricant to drain.
Go on to Sheet 2
12-48