TM 9-2350-222-34-1
HYDRAULIC RESERVOIR REPLACEMENT (Sheet 12 of 15)
40.
Position reservoir onto mounting bracket in driver's
compartment.
41.
screws (AZ).
42.
Start four screws (AZ) through mounting bracket into
reservoir (L).
43.
By hand, install two screws, lockwashers,
and washers (BA).
44.
By hand, install two screws, four washers,
and two nuts (BB).
45.
Using 3/4 inch socket, tighten four screws
(AZ) and two screws, lockwashers, and
washers (BA).
46.
Using 3/4 inch socket and extension on
screw and 3/4 inch wrench to hold nut,
tighten two screws, four washers, and two
nuts (BB).
47.
Place new packing (BC) in groove in end of
hose assembly (BD).
48.
49.
Position hose assembly (BD) and two split
flanges (BG) at flange (BH) and install four
screws (BF).
50.
Using 3/4 inch socket with extension, tighten
four screws (BF).
Go on to Sheet 13
TA130838
12-13