TM 9-2350-222-34-1
REAR DRAIN VALVE CONTROL ROD GUIDES REPLACEMENT (Sheet 2 of 3)
REMOVAL:
NOTE
To remove front guide, perform steps
1 thru 3. To remove rear guide,
perform steps 4 and 5.
1. Remove batteries (TM 9-2350-222-20-1).
2. Remove front control rod (page 11-9).
3. Using socket, remove two screws (A), lockwashers (B), and flat washers (C) holding front guide (D) to support
flange (E).
4. Remove rear intermediate control rod (page 11-13).
NOTE
Access to rear guide (D) is through engine
compartment lower access opening from engine
compartment.
5. Using socket and two extensions, remove two screws (A), lockwashers(B), and flat washers (C) holding rear guide
(D) to support flange (E).
Go on to Sheet 3
TA130804
11-7
