TM 9-2350-222-34-1
SLAVE RECEPTACLE AND RELAY LEAD HARNESS ASSEMBLY REPLACEMENT (LATE MODEL)
(Sheet 5 of 7)
2. Position cable lead (B) to positive terminal of
receptacle (C)
3. Using 9/16 inch socket, install and tighten screw and
new lockwasher (D) to secure cable lead (B) to
receptacle (C).
4. Position cover (E) over receptacle (C).
5. Using off-set cross-tip screwdriver, install and tighten
cover (E) to support bracket.
Go on to Sheet 6
TA252628
Change 1 5-48.6