TM 9-2350-222-34-1
SLAVE RECEPTACLE AND RELAY LEAD HARNESS ASSEMBLY REPLACEMENT (LATE MODEL)
(Sheet 7 of 7)
10. Slide three boots (T) onto leads (U).
11. Install three leads (U) onto bolt (V) and install
bolt to terminal (W).
12. Install washer (X) and nut (Y) onto bolt (V) on
two outer terminals. Using two 9/16 inch
wrenches, tighten nuts.
13. Install lead (Z), washer (X) and nut (Y) onto bolt
(V) on center terminal. Using two 9/16 inch
wrenches, tighten nuts.
4.
Coat terminals with grease (Item 14, Appendix
15. Slide three boots (T) down leads (U) and place
boots over terminals.
16. Install right ammunition rack (page 11-28).
17. Connect battery ground strap
TM 9-2350-222-20-1).
End of Task
TA252630
Change 1 5-48.8
