TM 9-2350-222-34-1
HULL POWER WIRING HARNESS ASSEMBLY REPLACEMENT (Sheet 4 of 14)
6. Using spanner wrench, loosen connector (U) from
slipring.
7. Manually remove connector (U) from slipring.
8. Using spanner wrench, loosen connector (V) from
slipring.
9. Manually remove connector (V) from slipring.
10. Using socket, remove two screws (W) from brackets
(X). Move cable to top of brackets (X).
11. Using socket, remove three screws (Y) from straps
(Z).
Go on to Sheet 5
5-26
