TM 9-2350-222-34-1
HULL POWER WIRING HARNESS ASSEMBLY REPLACEMENT (Sheet 1 of 14)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
TOOLS:
Spanner wrench
12 in. adjustable wrench
7/16 in. socket with 1/2 in. drive
7/16 in. combination box and open end wrench
9/16 in. combination box and open end wrench
1/2 in. combination box and open end wrench
1-1/8 in. open end wrench
REFERENCES: TM 9-2350-222-10
TM 9-2350-222-20-1
PRELIMINARY PROCEDURE: Remove bilge pump connector from dummy shell (TM 9-2350-222-20-1)
Disconnect three battery ground straps (TM 9-2350-222-20-1)
Remove generator regulator (TM 9-2350-222-20-1)
Remove gas particulate slipring air hoses (TM 9-2350-222-20-1)
Remove gas particulate air filters (TM 9-2350-222-20-1)
Traverse turret as required for access to harnesses under turret
platform (TM 9-2350-222-10)
5-23