TM 9-2350-222-34-1
FUEL TANKS (LEFT AND RIGHT) UPPER FRONT MOUNT REPLACEMENT (Sheet 1 of 6)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Cleaning and Inspection
Installation
TOOLS:
9/16 in. deep socket with 1/2 in. drive
Slip joint pliers
Ratchet with 1/2 in. drive
15/16 in. socket with 1/2 in. drive
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 Nom)
15/16 in. combination box and open end wrench
1/2 in. socket with 1/2 in. drive
SUPPLIES:
Dry cleaning solvent (Item 12, Appendix B)
Gloves (Item 13.1, Appendix B)
Rags (Item 31, Appendix B)
Goggles (Item 13.2, Appendix B)
Liquid detergent (Item 11, Appendix B)
Sealing Compound (Item 35, Appendix B)
Lockwire (Item 29, Appendix B)
PRELIMINARY PROCEDURES:
Remove right fuel tank (page 4-36) (as required)
Remove left fuel tank (page 4-51) (as required)
REMOVAL:
1. Remove washer (A) and lockwasher (B) from
threaded end of eye bolt (C).
2. Using 15/16 inch wrench, remove nut (D) from
eye bolt (C) end.
Go on to Sheet 2
Change 5
4-27
