TM 9-2350-222-34-1
FUEL TANK (RIGHT) REPLACEMENT (Sheet 1 of 15)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
TOOLS: 1-7/16 in. open end wrench
1-5/8 in. open end wrench
Torque wrench with 3/4 in. drive (0-600 lb-ft) (0-813 Nom)
15/16 in. crowfoot wrench with 3/4 in. drive
15/16 in. combination box and open end wrench (2 required)
Ratchet with 1/2 in. drive
1/2 in. socket with 1/2 in. drive
1/2 in. combination box and open end wrench
7/8 in. combination box and open end wrench
9/16 in. combination box and open end wrench
1-1/8 in. open end wrench
9/16 in. socket with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
1 in. combination box and open end wrench
1-1/2 in. open end wrench
8 in. adjustable wrench
6 in. ruler
Putty knife
SUPPLIES: Spacers (10863910)
Dry cleaning solvent (Item 12, Appendix B)
Adhesive (Item 1, Appendix B)
Rags (Item 31, Appendix B)
Sealing compound (Item 7, Appendix B)
Seal (10870458)
Seal (10870459)
PERSONNEL: Four
REFERENCES: TM 9-2350-222-20-1
PRELIMINARY PROCEDURES:
Remove powerplant (TM 9-2350-222-20-1)
Remove right air intake assembly (TM 9-2350-222-20-1)
Remove number four and five torsion bars (TM 9-2350-222-20-1)
Drain fuel tanks (TM 9-2350-222-20-1)
Remove right bulkhead access cover (TM 9-2350-222-20-1)
Go on to Sheet 2
TA130410
4-36
