TM 9-2350-222-20-2-3-2
36-10. CRADLE INSTALLATION PROCEDURE (CONT)
Procedure
Step
Using 7/16" wrench, attach electrical harness (1) to cradle (2) with two clamps (3), two
1.
screws (4), and two Iockwashers (5).
Put large flat washer (6), periscope link (7), and small flat washer (8) on elevation
2.
screw jack mounting screw.
Using 7/16" wrench, put new self-locking nut (9) on elevation screw jack mounting
3.
screw. Tighten nut.
NOTE
Follow-on Maintenance Action Required:
Install caliber .50 machine gun (TM-10).
END OF TASK
Para 36-10 Cont
36-26