TM 9-2350-222-20-2-3-2
CRADLE INSTALLATION PROCEDURE (CONT)
36-10.
Procedure
1.
Using 3/4 in. wrench and adjustable wrench, put flat washer (1) and new self-locking nut (2) on
shoulder bolt (3).
Place retainer plate (4) on shaft (5).
2.
3.
Using 9/16 in. socket wrench, attach retainer plate (4) to shaft (5) with four outer screws (6).
4.
Using long nose pliers, put Iockwire on four outer screws (6).
NOTE
Four inner screws will be put in during adjustment.
Using torque wrench and 3/4 in. socket, torque self-locking nut (2) to between 65 and 70 foot pounds
5.
(88 to 95 Newton meters).
GO TO FRAME 3
Para 36-10 Cont
36-23
Change 2
