TM 9-2350-222-20-2-3-2
35-8.
M240 MACHINE GUN MOUNT DISASSEMBLY PROCEDURE (CONT)
PROCEDURE
STEP
1.
Using hammer and 1/8 inch punch, remove spring pin (1) that attaches knob (2) to traversing shaft (3).
2.
Remove knob (2) and ratchet bracket (4).
3.
Repeat steps 1 and 2 for elevating shaft (5).
4.
Using 1-1/16 inch wrench unscrew and remove traversing shaft (3) that attaches traversing and
elevating bracket (6).
5.
Using hammer and 1/16 inch punch, remove spring pin (7) that attaches connecting pin (8) to
traversing and elevating bracket (6).
6.
Lift, and then remove, rear mounting bracket (9).
7.
Remove traversing and elevating bracket (6).
8.
Using hammer and 1/16 inch punch, remove spring pin (7) that attaches connecting pin (8) to rear
mounting bracket (9). Remove connecting pin (8).
9.
Unscrew and remove elevating shaft (5) from rear mounting bracket (9).
10.
Using hammer and 1/16 inch punch, remove two spring pins (10) that attach traverse and elevating
bracket shaft (11) to gun mount base (12).
11
Remove traverse and elevating bracket shaft (11).
NOTE
Follow-on Maintenance Action Required:
Clean all parts of M240 machine gun mount
(JGP).
END OF TASK
Para 35-8 Cont
35-32 Change 1
