TM 9-2350222-202-3-2
32-15. REPLENISHER INSTALLATION PROCEDURE (CONT)
Procedure
Step
1.
Place replenisher (1) on clamps (2) with elbow (3) at bottom.
2.
Using 1/2" combination wrench and 1/2" socket wernch, put two screws (4) and two nuts
(5) in clamps (2) to hold replenisher (1).
NOTE
Some hose connectors require a 9/16" wrench, and
others a 5/8" wrench.
3.
Using appropriate wrench. connect hose (6) to adapter (7).
4.
Using pliers, close petcock (8).
NOTE
Follow-on Maintenance Action Required:
Refill replenisher (TM-10).
END OF TASK
Para 32-15 Cont
32-36
