TM 9-2350-222-202-3-2
32-14. REPLENISHER REMOVAL PROCEDURE (CONT)
FRAME 1
Procedure
Step
Be careful when doing step 1 as oil may squirt out due
to air pressure.
Using pliers. open petcock valve (1) and drain oil into a bucket.
1.
NOTE
Some hose connectors require a 9/16" wrench and
others a 5 / 8`' wrench.
Using appropriate wrench. disconnect hose (2) from adapter (3). Place bucket under hose
2.
(2) to keep oil from spilling.
Using 1/2" combination wrench and 1/2" socket wrench, remove two screws (4) and
3.
two nuts (5) from two clamps (6).
4.
Open two clamps (6) and remove replenisher (7).
END OF TASK
Para 32-14 Cont
32-34
