TM 9-2350-222-20-2-3-2
LOADER'S SAFETY SWITCH AND MOUNTING PLATE INSTALLATION
31-3.
PROCEDURE
TOOLS: 7/16" open end wrench
Cross tip screwdriver (Phillips)
PERSONNEL: One
REFERENCES: JPG for procedure to connect electrical connectors
TM 9-2350-222-10 for procedure to use firing circuit tester
EQUIPMENT LOCATION INFORMATION:
CALLOUT
FOLDOUT
EQUIPMENT
11
Driver's Master Control Panel
6
165-mm Gun
2
Gunner's Control Box
7
Turret Traverse Lock
EQUIPMENT CONDITION: Driver's master control panel MASTER BATTERY switch set to OFF
Gunner's control box MAIN GUN switch set to OFF
Turret traverse lock set to LOCKED
Procedure
Step
1.
Using screwdriver, attach switch (1) to mounting plate (2) with two screws (3) and two
lockwashers (4).
GO TO FRAME 2
Para 31-3
31-5
