TM 9-2350-222-20-1-5
FIRE EXTINGUISHER BRACKET REPAIR (Sheet 2 of 4)
REMOVAL:
1.
Using pliers, remove cotter pin (A) from pin (B),
remove pin (B), and latch (C). Throw cotter pin
(A) away.
2.
Using wrench, remove nut (D) holding strap (E).
Remove strap (E).
3.
Using putty knife, dry cleaning solvent (Item
54, Appendix D), and rags, remove pad (F) and
three rubber strips (G).
4.
Using 11/ 16 inch wrench on nut (H), remove
nut (H) and strap (J).
5.
Using pliers, remove cotter pin (K) holding pin
(L), remove pin (L), and latch (M). Throw cotter
pin away.
Go on to Sheet 3
