TM 92350-222-20-1-5
BODY, ELBOWS, DELAY BOTTLE, AND RELATED TUBES REPLACEMENT (EARLY MODEL)
3.
Install tube assembly (C) along left side of vehicle between heater hose and delay bottle bracket to
driver's compartment.
4.
Using adjustable wrench, install bushings (D)
into delay bottle (E).
5.
Using 1-1/16 inch wrench, install adapters (F)
into bushings (D).
Position delay bottle (E) with bushing (D)
6.
and adapters (F) onto bracket (G).
Install strap (H) over delay bottle.
7.
Using 9/16 inch wrench, install and
8.
tighten bolt (J), nut, and washer (K) to
secure strap (H) over delay bottle (E).
Connect tube assembly (A) to adapter (F),
9.
finger tight.
Using torque wrench and 1-1/4 inch crowfoot, tighten tube assembly (A) nuts at each end to
10.
40-55 lb-ft (54-75
Connect tube assembly (C) to adapter (F), finger tight.
11.
Go on to Sheet 7
Change 4
